Lenovo C360 Hardware Maintenance Manual page 60

Step 22. Lift up the chassis to separate the chassis from the panel.
Step 23. To install the new the LED panel:
For two point touch model, the new LED panel
module including:
For five point touch model, the new LED panel
module including:
a. Line up the chassis with new LED panel, and then place it into position.
b. Secure the LED panel to the chassis with the four screws.
c. Line up the chassis and new LED panel with the front bezel, and then place it into position.
d. Secure the chassis to the front bezel with the four screws.
e. Reattach all the cables.
Step 24. Reattach the camera, heat-sink, speaker system, EMI cover, middle cover, optical drive, stand
holder, foot cover and stand base.
54
Lenovo C360–365 All-In-One ComputerHardware Maintenance Manual
LED panel, touch cable, converter board cable
LED panel, touch control board, touch cable,
converter board cable