Siemens Gigaset A100 Operating Manual page 9

Putting the telephone into service
Step 2: Inserting the battery
• Insert the battery connector into the socket (see inset); it
must lock securely into place.
• Place battery in the battery compartment.
• Insert battery cable in the clip provided.
• Put the battery compartment cover on and push it up until
it latches into position. To open the compartment, press
on the ridged section of the cover and push downwards.
• Only use approved batteries.
• Never use non-Siemens charging units as these
can damage the batteries.
The display is protected by a film.
Please remove protective film.
5