LG 32LC2D Service Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. LCD TV
  5. 32LC2D Series
  6. Service manual

LG 32LC2D Service Manual

Hide thumbs Also See for 32LC2D:
Table of Contents

Advertisement

Quick Links

LCD TV
SERVICE MANUAL
CHASSIS : LA51D
FACTORY NAME : 32LC2D-UD/37LC2D-UD
MODEL : 32LC2D/37LC2D
CAUTION
BEFORE SERVICING THE CHASSIS,
READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
e-mail:http://www.LGEservice.com/techsup.html
R
website:http://biz.LGservice.com

Advertisement

Table of Contents
loading

Related Manuals for LG 32LC2D

Summary of Contents for LG 32LC2D

  • Page 1 LCD TV SERVICE MANUAL CHASSIS : LA51D FACTORY NAME : 32LC2D-UD/37LC2D-UD MODEL : 32LC2D/37LC2D CAUTION BEFORE SERVICING THE CHASSIS, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.

  • Page 2: Table Of Contents

    CONTENTS CONTENTS ....................2 PRODUCT SAFETY ..................3 SPECIFICATION ..................6 ADJUSTMENT INSTRUCTION ...............10 TROUBLE SHOOTING ................15 BLOCK DIAGRAM...................22 WIRING DIAGRAM ..................23 EXPLODED VIEW .................. 24 REPLACEMENT PARTS LIST ............... 28 SVC. SHEET ....................- 2 -...

  • Page 3: Product Safety

    SAFETY PRECAUTIONS IMPORTANT SAFETY NOTICE Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and Replacement Parts List. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent Shock, Fire, or other Hazards.
  • Page 4 SERVICING PRECAUTIONS CAUTION: Before servicing receivers covered by this service unit under test. manual and its supplements and addenda, read and follow the 2. After removing an electrical assembly equipped with ES SAFETY PRECAUTIONS on page 3 of this publication. devices, place the assembly on a conductive surface such as NOTE: If unforeseen circumstances create conflict between the aluminum foil, to prevent electrostatic charge buildup or...
  • Page 5 IC Remove/Replacement Some chassis circuit boards have slotted holes (oblong) through Circuit Board Foil Repair which the IC leads are inserted and then bent flat against the Excessive heat applied to the copper foil of any printed circuit circuit foil. When holes are the slotted type, the following technique board will weaken the adhesive that bonds the foil to the circuit should be used to remove and replace the IC.

  • Page 6: Specification

    5) CADTV : 01~135 Input Voltage 1) AC 100 ~ 240V 50/60Hz DU-37LZ55 : 120V, 60Hz Market NORTH AMERICA Screen Size 32 inch Wide For 32LC2D 37 inch Wide Aspect Ratio 16:9 Tuning System LCD Module LC320W01-SL11 For 32LC2D LC370WX1-SL11...
  • Page 7 5. Chroma & Brightness 5.1 FOR 32LC2D-UD CONDITION : EZ-Picture "Normal" Item Unit Remark White peak brightness cd/m HDMI input, full white Contrast Ratio 600:1 800:1 Brightness uniformity Refer to LCD SPEC. Color coordinate 0.640 +/- 0.03 0.341 +/- 0.03 GREEN 0.287...
  • Page 8 6. Component Video Input (Y, CB/PB, CR/PR) Specification Proposed Resolution H-freq(kHz) V-freq(Hz) Pixel clock 720*480 15.73 SDTV ,DVD 480I 720*480 15.73 59.94 SDTV ,DVD 480I 720*480 31.50 SDTV 480P 720*480 31.47 59.94 SDTV 480P 1280*720 45.00 60.00 HDTV 720P 1280*720 44.96 59.94 HDTV 720P...
  • Page 9 HDTV 720P 1280*720 44.96 59.94 HDTV 720P 1920*1080 33.75 60.00 HDTV 1080I 1920*1080 33.72 59.94 HDTV 1080I 9. Mechanical specification <32LC2D> Item Content Remark Product Dimenson Width(W) Length(D) Height(H) Before Packing With Stand After Packing Product Weight Only SET 22Kg...

  • Page 10: Adjustment Instruction

    4-2. EDID DATA for LA51D If you turn on a still screen more than 20 minutes (Especially [32LC2D] Digital pattern, Cross Hatch Pattern), an afterimage may EDID for HDMI 1 (DDC (Display Data Channel) Data) occur in the black level part of the screen.
  • Page 11 EDID DATA for RGB 5. MST9883-Set Adjustment EDID table = 5-1. Synopsis 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F MST9883-Set adjustment to set the black level and the Gain 00 00 FF FF FF FF FF FF 00 1E 6D 5D 46 01 01 01 01 of optimum with an automatic movement from the analog =>...
  • Page 12 6. Adjustment of White Balance 7. Video(uPD) 6-1. Required Equipment 7-1. Required Equipment (1) Color analyzer (CA-110, CA-210 or similar product) MSPG925FA Pattern Generator-connector with Video Input (2) Automatic adjustor (with automatic adjustment hour 7-2. MSG925FA Adjustment necessity and the RS-232C communication being possible) (3) Pattern Generator(MSPG-925FA): DVI Output (1) After select the model, input the #201(NTSC-M).
  • Page 13 8. Shipping Conditions Item Condition Remark Input Mode TV02CH Volume Level Mute Aspect Ratio 16:9 Video EZ Picture Daylight Contrast Brightness Color Sharpness Tint Color-temperature Cool Audio Audio Language EZ SoundRite EZ Sound Normal Balance Treble Bass Front Surround TV Speaker Timer Auto clock Manual Clock...
  • Page 14 SVC REMOCON To turn the TV on or off POWER To turn the TV on automatically if the power is supplied to the TV. (Use the POWER ON POWER key to deactivate): It should be deactivated when delivered. To activate the mute function. MUTE To check TV screen image easily.

  • Page 15: Troubleshooting

    TROUBLESHOOTING 1. Power Board 1-1. General Power Flow Start check Doesn't the It is identical Is the Interface screen whole come with Power Off signal operated? out? condition? 1. Check the Power Off 2. Check the Interface condition. signal condition. Doesn't the Doesn't the Doesn't the...
  • Page 16 2. No Power (1) Symptom Does’t minute discharge at module. fl No front LED. fl (2) Check follow Power cord connected? Plug in power cord. Cable connecting the Line Filter Connect Cable. and Power Board connected? Is Fuse(F101) on Power Board Replace Fuse.
  • Page 17 3. Abnormal Display 3-1. Does’t display the OSD (1) Symptom LED is green fl The minute discharge continuously becomes fl accomplished from module (2) Check follow Check the LVDS Is the LVDS cable Replace cable. cable? connected well? Reset cable. Replace Is the VSC Digital Operates the Thine...
  • Page 18 3-2. In case of does’t display the screen into specific mode (1) Symptom The screen does not become the display from specific input mode fl (RF, AV, Component, RGB, DVI). (2) Check follow Check the all input mode should become normality display. fl...
  • Page 19 (5) Abnormal display in Component 480i mode Is the Video Decoder Are the Input voltage, IIC Replace IC IC306 UPD64011 Comm. and HV sync good? good? Is IC400 Are the Input voltage, IIC Replace IC Scaler good? Comm. and HV sync good? (6) Abnormal display in Component DTV mode Are the Input voltage, IIC Is normal the IC104...
  • Page 20 (7) Abnormal display in RGB DTV mode Are the Input voltage, IIC Is normal the IC101 Replace IC101 Comm. and HV sync good? CXA2181Q? Is normal the IC306 Are the Input voltage, IIC Replace IC306 MST9883C? Comm. and HV sync good? Is normal IC400 the Are the Input voltage, IIC Replace IC400...
  • Page 21 4. No sound (1) Symptom LED is green fl Screen display but no audio fl (2) Check follow Check Speaker Is the SPK cable Replace SPK cable cable? connected well? Reset cable. Audio normal on Is the Flat cable IC1004 MSP4440K IC1002 NSP-2100A RGB/DVI? connected well?

  • Page 22: Block Diagram

    BLOCK DIAGRAM - 22 -...

  • Page 23: Wiring Diagram

    - 23 -...

  • Page 24: Exploded View

    - 24 -...
  • Page 25 - 43 -...
  • Page 26 - 44 -...
  • Page 27 - 45 -...

  • Page 28: Replacement Parts List

    - 46 -...
  • Page 29 - 47 -...
  • Page 30 - 48 -...
  • Page 31 - 49 -...
  • Page 32 - 50 -...
  • Page 33 - 51 -...
  • Page 34 - 52 -...
  • Page 35 - 53 -...
  • Page 36 - 54 -...
  • Page 37 - 55 -...
  • Page 38 - 56 -...
  • Page 39 - 57 -...
  • Page 40 - 58 -...
  • Page 41 - 59 -...
  • Page 42 Dec., 2005 P/NO : 38289S0043C Printed in Korea...

This manual is also suitable for:

37lc2d32lc2d-ud37lc2d-ud

Table of Contents