Table of Contents
Advertisement
4
Hardware Description
Front Panel
Power Indicator: Green light indicates a normal power supply.
Run Indicator: Blinking green light indicates normal operation.
Alarm Indicator: When the system starts up, the red light will blink. It also indicates the
gateway's abnormal operation.
P1 – P4 stands for Port 1 – Port 4: Port 1 – Port 2 are connected to your analog telephone,
and Port 3 – Port 4 are connected to your original telephone line on the wall jack with RJ-11
cable.
P1 – P8 stands for Port 1 – Port 8: Port 1 – Port 4 are connected to your analog telephone,
and Port 5 – Port 8 are connected to your original telephone line on the wall jack with RJ-11
cable.
P1 – P8 stands for Port 1 – Port 8: Port 1 – Port 6 are connected to your analog telephone,
and Port 7 – Port 8 are connected to your original telephone line on the wall jack with RJ-11
cable.
WAN stands for the WAN Port Indicator.
L1 – L4 stands for the LAN Port Indicator.
When starting up the system, the Alarm, Run, and Power indicators will light up. After
about 40 seconds, the Alarm indicator will go off, the Run indicator will blink in green,
and the Power indicator will stay green under normal operational conditions. If the
Alarm indicator continues to blink, it means the system is currently communicating
with ISP and has yet to obtain an IP address.
WAN, LAN indicators
Voice ports indicators
Status indicators
Advertisement
Table of Contents
