Sort; Erase Programme; Useful Viewing Functions; Tv Start-Up Time Setting - Sharp Aquos LC-60LE640X Operation Manual

Basic adjustment
Label
When a TV channel sends its network name, the "Auto
installation" detects the information and assigns a
name to it. However, you can change channel names
individually.
Select each character of the new name for the
channel with using the software keyboard (see
page 15).
NOTE
• The name can be five characters or less. Select "Cancel" to
set the channel name.
Skip
Channels with "Skip" set to "On" are passed over when
using CHr/s even if selected while watching the
image from the TV.
Lock
You can block the viewing of any channel.
NOTE
• See page 43 for setting a password.
• When "Lock" is set to "On" for a channel, "Child lock has
been activated" displays, and the image and sound of the
channel are blocked.
• When pressing C while "Child lock has been
activated" displays, the password input window will display.
Inputting the correct password unlocks the "Password"
temporarily until the power is turned off.

Sort

Channel positions can be sorted freely.
1
Press c/d to select "Yes", and then press ?.
2
Press a/b/c/d to select the channel you want
to move, and then press ?.
3
Press a/b/c/d to move it to the desired
position, and then press ?.
4
Repeat steps 2 and 3 until all desired channels are
sorted.

Erase programme

Channels can be erased individually.
1
Press c/d to select "Yes", and then press ?.
2
Press a/b/c/d to select the channel you want
to erase, and then press ?.
• A message window pops up.
3
Press c/d to select "Yes", and then press ?
to erase the selected channel. All the subsequent
channels move up.
4
Repeat steps 2 and 3 until all desired channels are
erased.
42

Useful viewing functions

TV Start-up time setting

View setting
Quick start
You can reduce the TV's start-up time after turning on
the power with the remote control unit.
Go to "HOME" > "TV Menu" > "Setup" > "View
setting" > "Quick start".
The TV quickly starts up from standby.
On 36W or more of power consumption is
required during standby.
The "Quick start" mode will automatically
turn on and off depending on the time
shift status. If playable data exists on the
Auto (Time shift)
USB storage device registered for time
shift, "Quick start" will be automatically
set to the same status as "On".
Power consumption is small during
Off
standby.
NOTE
• You cannot select "Off" in the "Quick start" menu while time
shift is activated. Follow the on-screen instructions to change
the "Quick start" settings.
• If you want to clear the playable data, go to "HOME" >
"TV Menu" > "Setup" > "View setting" > "Time shift setting" >
"Clear the Time shift memory" (Page 59).
Item