6 Other features
Set the alarm timer
This micro system can be used as an alarm
clock. You can select the disc or tuner as alarm
source.
Note
•
Make sure that you have set the clock correctly.
1
Press POWER to switch the system to
standby mode.
» The clock is displayed.
2
Press and hold TIMER for 2 seconds until a
prompt to select the source is displayed.
3
Press DISC or TUN to select an alarm
source.
4
Press TIMER to confirm.
» The hour digits begin to blink.
5
Press
/
to set the hour.
6
Press TIMER to confirm.
» The minute digits begin to blink.
7
Press
/
to set the minute.
8
Press TIMER to confirm.
» The timer is set and activated.
Activate and deactivate alarm timer
Press TIMER ON/OFF repeatedly to activate or
deactivate the alarm timer.
» If
is displayed, the alarm timer is activated.
» If
disappears, the alarm timer is
deactivated.
Note
•
The alarm timer is not available in AUX mode.
•
If the selected alarm source is unavailable, tuner is
activated automatically.
Set the sleep timer
This micro system can switch to standby mode
automatically after a set period of time.
When the system is turned on, press SLEEP
repeatedly to select a preset period (in
minutes).
» When the sleep timer is activated,
displayed.
• To deactivate the sleep timer, press SLEEP
repeatedly until [0] is displayed.
» When the sleep timer is deactivated,
disappears.
Listen through headphone
Plug a headphone into the HEADPHONE
socket on the micro system.
is
EN
13