Toner Setting - Brother HL-1112 User Manual

Troubleshooting and other information

Toner Setting

The machine's ability to continue printing even when the toner level is getting low depends on the machine
setting:
 Stop mode (default setting)
The machine will stop printing until you replace the toner cartridge with a new one when the LEDs indicate
Replace Toner.
 Continue mode
To force the machine to continue printing after the LEDs indicate Replace Toner, press
times to enter Continue mode (all the LEDs blink twice, and then the Ready LED (
machine will continue printing until the LEDs indicate Toner Ended.
To return to the default setting (Stop mode), press
NOTE
• Make sure that the top cover is closed before you change the mode.
• When the LEDs indicate an error mode, you cannot change the mode.
• If you continue printing in the Continue mode, we cannot guarantee the print quality.
• While using Continue mode the print may appear faint.
seven times (all the LEDs blink once).
A
A
seven
) turns on). The
48