LG REG-71A Service Manual page 13

10. Slide the unit into the cabinet.(See Fig. 8)
CAUTION: For security purpose, reinstall
screws (Type A) at the cabinet's sides.
11. Cut the Foam-Strip
between the upper and lower window sash.
(See Fig. 9)
12. Attach the window Locking Bracket
screw. (See Fig. 10)
13. Attach the front grille to the cabinet by inserting the
tabs on the grille into the tabs on the front of the cab-
inet. Push the grille in until it snaps into place.
(See Fig. 11)
14. Lift the inlet grille and secure it with a type A screw
through the front grille.(See Fig. 12)
to the proper length and insert
with a type C
On/Off
On/Off
Fan Cool
TIMER ENER
SAVE GY Heat
R MODE
Screw(Type A)
Screw(Type A)
Figure 11
On/Off On/Off Fan Cool
Heat
TIMER ENERGY
MODE
SAVER
Service Manual 13
Installation
Power cord
Figure 8
Foam-Strip
8
Figure 9
13
Figure 10
On/Off Fan Cool
On/Off Heat
ENERG Y MODE
TIMER SAVER
Figure 12
Figure 13