Bosch Exxcel 1400 Express Instruction Manual page 23

Example:
"Start in" display and button
Before starting a programme, you can specifiy by how
many hours the "Start in" time should be delayed.
q Turn the programme selector to the desired pro
gramme.
The "Ready" indicator light is on.
The expected "Ready in" time will be displayed.
q Press the "Start in" button, "1h" (h=hour) appears
in the display.
The point between the digit and the "h" flashes.
q Press the "Start in" button until the desired number
of hours is displayed.
i The "Start in" time can be set by hours.
The time can be delayed up to a maximum of
"19h".
If the "Start in" time is set for "19h", you can arrive
at the "Ready in" mode by pressing the "Start in"
button again.
The "Start in" time begins running immediately after
setting. This is indicated by the point between the digit
and the "h" flashing. The point flashes until the "Start
in" time has elapsed.
i The "Start in" time is counted down by the hour.
The programme is automatically started after the
"Start in" time has elapsed.
The indicator light of the respective programme
segment comes on. The "Ready in" time appears
in the display.
i Changes to the "Start in" time are possible at any
time, press the "Start in" button until the new num
ber of hours appears, in order to do this. The new
"Start in" time elapses without having to restart the
programme.
i If the programme sequence is changed, or if the
programme is interrupted, the preselected "Start
in" time is also interrupted. The "Ready in" time of
the newly selected programme appears in the dis
play. The "Start in" time must be reselected.
i Topping up laundry is possible at any time during
the "Start in" time. Close the loading door.
23