Beko Elektronik A.S
2) Be careful do not get a damage on the board by ESD during handling of TCP.
3. Misassembling of TCP
1) The misassembling of TCP is the cause of defect.
4. Checking method of misassembling of TCP
1) Disconnecting H3 from
CN8006 of LBE.
5. Assembling & Disassembling of FFC
Service Manual
2) Whether H8 and H9 are
connected.
37 / 44
Plasma Display Module-Samsung V3
3) Checking the resistance
between Pin 1 and 5.
Resistance > a few [ K Ohm] : OK
Resistance < 20 Ohm : At
least ,more than 1pc of
TCP is wrong.