Download Print this page
Philips DVP3350K/55 Service Manual

Philips DVP3350K/55 Service Manual

Hide thumbs Also See for DVP3350K/55:

Advertisement

Quick Links

Service Manual
. Technical Specifications.........................................................1-2
. Safety Instruction, Warning & Notes........................................1-3
. DFU Instruction..............................................................................2-1
. Mechanical and Dismantling Instructions....................................3-1
. Software Version & Upgrades, Region Code Change.................
. Trouble Shooting Chart......................................................
. Wiring Diagram..................................................................6-1
. Electrical Diagrams and Print-layouts......................................7-1
. Set Mechanical Exploded view & Part list................................8-1
. Revision List..................................................................................9-1
©Copyright 2009 Philips Consumer Electronics B.V. Eindhoven, The Netherlands
All rights reserved. No part of this publication may be reproduced, stored in aretrieval system or
transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise
without the prior permission of Philips.
Published by SL - 940 BU AVM
Version 1.3
TABLE OF CONTENTS
Printed in The Netherlands
Subject to modification
DVP/HTP3350K DVP3354K/55
DVP3350K/55
HTP3350K/55
DVP3354K/55
Page
4-1
.
5-1
.
LASER PRODUCT
3139 785 34793
GB
PHILIPS
CLASS 1

Advertisement

loading

Summary of Contents for Philips DVP3350K/55

  • Page 1 . Electrical Diagrams and Print-layouts..….…………………..….…7-1 . Set Mechanical Exploded view & Part list.…………………..….….8-1 . Revision List..................9-1 ©Copyright 2009 Philips Consumer Electronics B.V. Eindhoven, The Netherlands CLASS 1 All rights reserved. No part of this publication may be reproduced, stored in aretrieval system or...
  • Page 2 Frequency response: DVD: 4 Hz - 22 kHz (48 kHz); 4 Hz - 44 kHz (96 kHz) SVCD: 4 Hz - 20 kHz (44.1 kHz); 4 Hz - 22 kHz (48 kHz) Note CD/VCD: 4 Hz - 20 kHz (44.1 kHz) Signal-Noise (1 kHz): >...
  • Page 3 Safety instruction, Warning & Notes Safety instruction 1. General safety 2.Laser safety Safety regulations require that during a repair: This unit employs a laser. Only qualified service personnel . Connect the unit to the mains via an isolation transformer. may remove the cover, or attempt to service this device .
  • Page 4 Warning 1.General 2. Laser . All ICs and many other semiconductors are susceptible to . The use of optical instruments with this product, will increase eye hazard. electrostatic discharges (ESD). Careless handing during repair can reduce life drastically. Make sure that, during .
  • Page 5 - lead free BGA-ICs will be delivered in so-called respected by the workshop during a repair: ‘dry-packaging’ (sealed pack including a silica gel Use only lead-free solder alloy Philips SAC305 with pack) to protect the IC against moisture. After order code 0622 149 00106. If lead-free solder-paste is...
  • Page 6 Descripción general del Remote control producto Unidad principal (Modo de espera encendido) • Enciende el reproductor de DVD o pasa al modo de espera. Bandeja de discos Panel de visualización Z (Abrir/Cerrar) • Abre o cierra la bandeja de discos. (Modo de espera encendido) u (Reproducir/Pausa) •...
  • Page 7 v V b B (Botones de navegación) KARAOKE • Para navegar por los menús. • Accede o sale del menú de karaoke. B) o retrocede (b) • Avanza ( AUDIO/CREATE MP3 rápidamente. Púlselos varias veces para • Selecciona un idioma o canal de audio. incrementar la velocidad de búsqueda.
  • Page 8 Mechanical and Dismantling Instructions Dismantling Instruction The following guidelines show how to dismantle the player. Step1: Remove 5 screws around the Top Cover, and then remove the Top Cover (Figure 1). Figure 1 Step2: If it is necessary to dismantle Loader or Front Panel, the Front door should be removed first. (Figure 2) Note: Make sure to operate gently otherwise the guider would be damaged.
  • Page 9 Mechanical and Dismantling Instructions Dismantling Instruction Step3: If the tray can’t open in normal way, you can make it through the instruction as below (Figure 3). Note: Make sure to operate gently otherwise the guider would be damaged. Figure 3 Step4: Dismantling Front Panel, disconnect the connectors (XP5, XP6.
  • Page 10 Mechanical and Dismantling Instructions Dismantling Instruction Figure 5 Step5: Dismantling Loader, disconnect the 3 connectors (XP2, XP3, XP4) aiming in the below figure, and remove 1 screw that connects the loader and the bottom cabinet. (Figure 5 & 6) Figure 6...
  • Page 11 Mechanical and Dismantling Instructions Dismantling Instruction Step6: Dismantling Main Board, first disconnect the connector (XP1), and then remove 4 screws. (Figure 7) Step7: Remove the 4 screws on Power Board to dismantle the Power Board. (Figure 7) Figure 7...
  • Page 12 Software upgrade Preparation to upgrade software 1) Start the CD Burning software and create a new CD B. Read out the software versions to confirm upgrading project (Data Disc) with the following setting: Power on the set and press <Setup> button on the remote control.
  • Page 13 Trouble shooting chart Spindle motor does not move Motor no move Check the FFC connection Correct connection between 24P and the loader. Check whether “M5V” Check the M5V power supply (+5V) voltage is normal. Check whether laser voltage Check/Replace Q5,Q6,Q7,Q8. (1.9V for CD &...
  • Page 14 Trouble shooting chart The power can not be on or off The power can’t be on or off Check the power supply Repair the power board on the power board is normal. Check if the XS301 on the Check/Correct front board to XP5 on the connection decoder board is in good contact.
  • Page 15 Trouble shooting chart All output voltages on the power board is 0V or deviated. All output voltages on the power board is 0V or deviated Check whether Replace F1 F1 is blown Replace C1&C2 if D1, D2, D3, D4 are Check whether there is normal.
  • Page 16 Trouble shooting chart Disc cannot be read . Disc cannot be read. Check the FFC connection Check the loaded circuit between 24P and the loader. 1.Check voltage on pin 23 of U1 varies between 0 and 3.3V: Check whether there is laser 3.3V for CD voltage (1.9V for CD and 2.4V for 0V for DVD...
  • Page 17 Trouble shooting chart Only DVD disc or only disc except DVD can be played Only DVD disc, or only disc except DVD can be Played. Check Check the loaded circuit connection between 24pin and the loader. Check laser voltage (2.4V) output Check the solder status on U1 and on L10, if pin18 of U1 is at low peripheral components...
  • Page 18 Trouble shooting chart No display on LED, and buttons do not work No display on LED, and buttons do not work Check whether there is correct contact between Correct connection XS301 and XP5 Fix power supply board top Check VCC(+5v) voltage on the power and front a power supply for should electric circuit...
  • Page 19 Trouble shooting chart Distorted audio and loud noise Distorted audio and loud noise Check the power supply voltages +12V to the operation amplifying Check Q3 Q3 is normal. Check whether muting Replace R84, R94, transistor R84,R94, are normal Check whether muting Replace Q11 Q12 transistor...
  • Page 20 Trouble shooting chart Abnormal color of video picture Abnormal color of video picture Check whether Check Y2, R20,R27,C22 and C23 27MHz output signal Check whether the 3.3V Check other of power supply electric and 1.8V power supply circuit voltages on the decoder board are normal.
  • Page 21 Trouble shooting chart Remote reception is insensitive or fails. Remote reception is insensitive or fails. Check if the remote Check battery control works properly. Check if the power supply Check R315 C315 voltage to the remote censor is normal Use an oscilloscope to check if there is output waveform from the first pin IR of the REM301(PIN1 - RC waveform) remote censor after pressing button on the...
  • Page 22 Trouble shooting chart 5-10 No video picture, no sound. No video picture, no sound. Check whether all the voltages from the power board to the Check the loaded circuit decoder board are normal. Check if the reset circuit consisting ofCE7, D2 is normal (at a low level Change CE7, D2.
  • Page 23 DVP HTP3350(4)K /55 WIRING DIAGRAM COAX SCART CVBS CVBS AUDIO RGB/YUV AMP&LPF SWITCH AK4385ET VIDEO LPF POWER SUPPLY 24PIN*0.5 XS201 5PIN*2.5 MT1389L S P+ LIMIT LOAD- LOAD+ 5PIN*2.0 TROUT TRIN 11PIN*2.0 FLASH MAIN BOARD 4PIN*2.0 USB_DM USB_DP SWITCH XS301 11PIN*2.0 XS601 XP303 XS302...
  • Page 24 Front Board Electric Diagram: R315 REM301 LED+ 100 o m R318 LED- STB_LED POWER_K1 100R/NC POWER_K XS302 C306 CE301 CON4 2.0 XS301 C315 0.1u 47uF WAKE_SW C316 C307 C308 100p 100p 100p R320 for dvp331x V CC DATA DATA POWER_K STB_LED R303 R304...
  • Page 25 Swith Board Electric Diagram: K303 POWER LED3 CON4 2.0 C319 C317 C318 SWITCH BOARD...
  • Page 26 OK Board & USB Board Electric Diagram: R210 12VA R202 12VA C201 CE200 CE201 0.1u 22uF R203 22uF C205 R205 180K P601 R211 KARAOKE INPUT C210 R201 U200A C211 100K 5.6K 2.2uF 2.2uF R200 C203 NJM4558 NJM4558 3.5mm 1000p MIC_OUT 12VA C208 100p...
  • Page 27 Power Board Electric Diagram: T2AL/250ac NTC 10&20 1N4007 1N4007 CON1 AC INPUT 680uH AC INPUT 10K471 + C1 + C2 1N4007 1N4007 10uF/400V 250V/450V 15uF/400V 250V/450V EEL19 FR102 10uF/50V CON2 152/1KV 1/4W120K 1/4W120K -22V +12V IN4007 FR102 1/6W10k 47uF/25V 6X2.5 HEADER 104/50V SR360/SR340 6.8uH...
  • Page 28 Main Board Electric Diagram: Power 100pF AKIN1 0.1uF 5.1k +12VA CE18 L CH pitc =2.0mm*3 r efa C101 NJM4558 OPA 10uF/16v 3300p 0.1uF 100p 1000pF 100k +12VA 1000pF +12VA A_MUTE AKIN1 AKIN1 2N3904 AUDIO_MUTE AUDIO_MUTE 3 AUDIO I/F 100pF 5.1k CE21 r efa NJM4558 OPA...
  • Page 29 DQ[0..15] DQ[0..15] 3 M A[0..11] MA[0..11] Main Board Electric Diagram: MT1389L/K LQFP128 & MOTOR DRIVER DQM[0..1] DQM[0..1] BA[0 ..1] BA[0..1] DC LK DCLK RAS# RAS# CAS# CAS# V _R R/V_O 0R/1.8uH SD33 DRAM I/F S DCKE 75 1% 100pF PESD5V0S1BA DC S# S F_CK SF_CK...
  • Page 30 DQ[0..15] RESET Circuit DQ[0..15] 4 DV33 M A[0..11] SP-A MA[0..11] RFV18-1 DV33 Main Board Electric Diagram: SDRAM & FLASH & Video output URST# DQM[0..1] LIMIT DQM[0..1] RFV18-2 BA[0 ..1] BA[0..1] 1N4148 0.1uF 3.3k DC LK 0.1uF DCLK PITCH 2.0mm*6 R26 1k RAS# RAS# URST#...
  • Page 31 MT1389L/K Features Support List (MIC/USB Only for MT1389L) Main Board Electric Diagram: Audio I/F Item Features 5.1CH(only 2CH for 89K) + USB + VFD + AMUTE COMMON1389L/K_KHM313_AM5888_V2 Desktop Model RFVDD3 MT1389L/K (LQFP128) DVD TEST Board w/ Sony KHM Series PUHs DV33 MT1389L/K General GPIO List Name...
  • Page 32 Front Board Print-layout (Bottom side):...
  • Page 33 7-10 7-10 OK Board Print-layout (Top side): OK Board Print-layout (Bottom side):...
  • Page 34 7-11 7-11 Power Board Print-layout (Bottom side):...
  • Page 35 7-12 7-12 Main Board Print-layout (Top side):...
  • Page 36 7-13 7-13 Main Board Print-layout (Bottom side):...
  • Page 37 Exploded View for DVP(HTP)3350K/55 & DVP3354K/55: It's a general mechanical exploded view for DVP(HTP)3350K/55 & DVP3354K/55, Pls refer to the model set for detailed information. Ass'y 1 includes components:1.3.4.5.21...
  • Page 38 DVP3350K/55 SERVICE PARTLIST Electrical PARTS LIST MECHANICAL & ACCESSORIES PARTS LIST 12NC No. Part Name Q'ty 12NC No. Part Name Q'ty 996510020933 ASSY-MAIN BD 996510020929 TOP COVER 996510009667 SMD. SWITCHING DIODE LL4148 996510020944 BACK PANEL 996510009668 BAT54C 996510006463 996510020926 IC PESD5V0S1BA...
  • Page 39 HTP3350K/55 SERVICE PARTLIST ELECTRICAL PARTLIST ASSY-US BD COMPONENT PARTLIST 12NC No. Description Q'ty 12NC NO. Description Q'ty 996510020933 ASSY-MAIN BD U200 996500032494 IC AS4558M 996510020934 ASSY-SW BD 996510020936 ASSY-PW BD MECHANICAL PARTLIST 996510020918 ASSY-US BD (OK+USB) 12NC No. Description Q'ty 996510020922 ASSY-FB BD 996510020929...
  • Page 40 DVP3354K/55 SERVICE PARTLIST ELECTRICAL PARTLIST ASSY-US BD COMPONENT PARTLIST 12NC No. Description Q'ty 12NC No. Description Q'ty 996510030141 ASSY-MAIN BD U200 996500032494 IC AS4558M 996510020934 ASSY-SW BD 996510020922 ASSY-FB BD MECHANICAL PARTLIST 996510020918 ASSY-US BD (OK+USB) 12NC No. Description Q'ty 996510020936 ASSY-PW BD 996510030142...
  • Page 41 REVISION LIST Version 1.0 * Initial release for DVP3350K/55 Version 1.1 * Updating Part List Version 1.2 * Adding HTP3350K/55 Version 1.3 * Adding DVP3354K/55...

This manual is also suitable for:

Htp3350k/55Dvp3354k/55