Vlan > 802.1Q Vlan; Vlan > 802.1Q Vlan Pvid; Vlan > 802.1Q Management Vlan - D-Link DGS-1210-20 Reference Manual

4 Configuration
D-Link Web Smart Switch User Manual
D-Link Discover Protocol State: Enable or disable the Discover Protocol state.
D-Link Discover Protocol Report Timer (Seconds): Configure the report timer of D-Link Discover Protocol
in seconds. The values are 30, 60, 90, 120 or Never.
Click Apply to implement changes made.
VLAN > 802.1Q VLAN
A VLAN is a group of ports that can be anywhere in the network, but communicate as though they were in
the same area.
VLANs can be easily organized to reflect department groups (such as R&D, Marketing), usage groups (such
as e-mail), or multicast groups (multimedia applications such as video conferencing), and therefore help to
simplify network management by allowing users to move devices to a new VLAN without having to change
any physical connections.
The IEEE 802.1Q VLAN Configuration page provides powerful VID management functions. The original
settings have the VID as 1, no default name, and all ports as "Untagged"
Rename: Click to rename the VLAN group.
Delete VID: Click to delete the VLAN group.
Add New VID: Click to create a new VID group, assigning ports from 01 to 28 as Untag, Tag, or Not
Member. A port can be untagged in only one VID. To save the VID group, click Apply.
You may change the name accordingly to the desired groups, such as R&D, Marketing, email, etc.
Figure 4.35 – Configuration > 802.1Q VLAN
Figure 4.36 – Configuration > 802.1Q VLAN > Add VLAN
VLAN > 802.1Q VLAN PVID
The 802.1Q VLAN PVID setting allows user to configure the PVID for each ports. Click Apply to implement
changes made.
Figure 4.37 – Configuration > 802.1Q VLAN PVID
VLAN > 802.1Q Management VLAN
The 802.1Q Management VLAN setting allows user to transfer the authority of the switch from the default
VLAN to others created by users. This allows managing the whole network more flexible.
32