Advertisement
You can use your blender for making
delicious and nutritious cold drinks.
The dispensing lid means that it can
easily be converted into a travel
mug.
A selection of recipes can be found
at the back of the instructions, and
the handy markings on the mug
allow you to mix ingredients of your
choice. Combinations of fruit and
yoghurt (both fresh and frozen), ice
cream, ice cubes, juice and milk can
be used.
before using for the first time
Wash the parts: see 'care &
cleaning'.
key
blade assembly
dispensing lid x 2
travel mug x 2
power unit
speed control
Note: Model SB054 is only
supplied with one travel mug
and one dispensing lid.
to use your blender
1 Add ice or frozen ingredients to the
mug
.
This includes frozen fruit, frozen
yoghurt, ice cream or ice. These can
be added up to the level marked
'max frozen ingredients'.
2 Add liquid ingredients to the mug.
This includes fruit (not frozen), fresh
yoghurt, milk and fruit juices. These
can be placed into the mug to the
level marked 'max capacity'.
3 Hold the underside of the blade unit
and lower it onto the mug, blades
down – turn clockwise to lock
4 Shake to disperse the ingredients.
5 To fit the assembled mug to the
power unit, turn the mug upside
down and line up the tabs on the
mug with the grooves in the power
unit and then turn clockwise until a
positive click is heard
6 Select the required speed.
7 When the desired consistency is
8 Turn the mug the other way up and
9 Fit and lock the lid by turning
.
.
4
When blending recipes that include
frozen ingredients turn the speed
control to 'low' for 5 seconds to
start the mixing process, then turn
the speed control to 'high'.
Allow the ingredients to blend until
smooth.
reached, turn the speed control to
the 'off' position. Turn the mug
anticlockwise to release it from the
power unit.
unscrew the blade assembly.
clockwise.
When you want to drink, simply flip
open the lid cover and clip into
position
. The drink can be
consumed straight from the mug.
hints & tips
Note that when the mug is filled to
max capacity (500ml), this is
approximately two servings.
If you do not intend to consume
your drink immediately, keep it
refrigerated.
Ensure your drink is thin enough to
be able to drink from the dispensing
lid. To make a thinner drink add
more liquid.
Once your drink has reached the
desired consistency, you can use
the pulse 'P' to ensure all
ingredients are thoroughly blended.
Use the pulse 'P' to operate the
power unit in a start stop action to
control the texture of your drink.
After blending, some drinks may not
be completely smooth due to seeds
or the fibrous nature of ingredients.
Some drinks may separate on
standing, therefore it is best to drink
them straight away. Separated
drinks should be stirred before
drinking.
important
Never blend dry ingredients (e.g.
spices, nuts) or run the Blender
empty.
Do not use the Blender as a storage
container whilst on the power unit.
Advertisement
