Motorola MOTO X FORCE Manual page 46

Connect & transfer
Connect & transfer
Quick start: connect & transfer
Bluetooth wireless
Wi-Fi networks
USB cables
Share your data connection
Data usage
NFC
Your cloud
Phone & tablet
Memory card
Virtual Private Networks (VPN)
Mobile network
Aeroplane mode
Menu More
Back Next
Wi-Fi networks
Turn Wi-Fi power on/off
Find it: Apps > >
Settings Wi-Fi
turn it on
Connect to networks
To find networks in your range:
1 Tap Apps > Settings > Wi-Fi
Tip: to show your phone's MAC address and Wi-Fi settings,
tap Menu > .
Advanced
2 Make sure the Wi-Fi switch is turned on.
3 Tap a found network to connect it (if necessary,
enter , and
Network SSID Security Wireless password
tap Connect ).
When your phone connects, the Wi-Fi status
indicator appears in the status bar.
Note: if you see a question mark in the Wi-Fi status
indicator , swipe the status bar down, tap the network
and enter the network's password.
Tip: when Wi-Fi is on, your phone automatically reconnects to
available networks it has used before. If a router previously had
no Internet connection, your phone will not automatically
connect to it.
Wi-Fi hotspot
Note: this phone supports apps and services that may use a lot
of data, so make sure your data plan meets your needs.
, then tap the switch to
Contact your service provider for details.
Your can make your phone a Wi-Fi hotspot to provide portable,
convenient Internet access to other Wi-Fi-enabled devices.
Note: keep it secure. To protect your phone and hotspot from
unauthorised access, it is strongly recommended that you set
.
up hotspot security (WPA2 is the most secure), including
password.
Find it: Apps
hotspot
Note: these steps may vary depending on your network.
, and
1 Your phone turns off Wi-Fi and uses the mobile network for
Internet access. Tap
• Network SSID: enter a unique name for your hotspot.
• Security: select the type of security you want:
• Password: create a password with at least eight
2 Tap
When your Wi-Fi hotspot is active, other Wi-Fi enabled devices
can connect by entering your hotspot's
selecting a
password
> Settings > More > Tethering & portable
and select
Portable Wi-Fi hotspot
Set up Wi-Fi hotspot
. For , enter a unique password that others
WPA2 WPA2
will need to access your Wi-Fi hotspot.
Note: is recommended by IEEE.
WPA2
characters.
SAVE .
Network name
type and entering the correct
Security
.
to set up security:
or
open
,
Wireless