Dell S2218H User Manual page 29

OSD Warning Messages
When the Dynamic Contrast feature is enabled (in these preset modes: Game or
Movie), the manual brightness adjustment is disabled.
When the monitor does not support a particular resolution mode, the following
message is displayed:
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See
frequency ranges addressable by this monitor. Recommended mode is 1920 x 1080.
You will see the following message before the DDC/CI function is disabled:
When the monitor enters the Power Save Mode, the following message appears:
If you press any button other than the power button, the following messages will
appear depending on the selected input:
Dell S2X18H/HX
To allow manual adjustment of brightness, the Energy Smart/Dynamic
Contrast will be switched off.
Do you want to continue?
Dell S2X18H/HX
The current input timing is not supported by the monitor display.
Please change your input timing to
other monitor listed timing as per the monitor specifications.
Monitor Specifications
Dell S2X18H/HX
The function of adjusting display setting using PC application will be
disabled.
Do you wish to disable DDC/CI function?
Dell S2X18H/HX
Entering Power Save Mode.
Dell S2X18H/HX
? No VGA signal from your device.
Press any key on the keyboard or move the mouse to wake it up.
If there is no display, press the monitor button again to select
the correct input source.
No
Yes
1920x1080, 60Hz
or any
for the Horizontal and Vertical
No
Yes
Operating Your Monitor
29
|