a. Disconnect the camera cable from the connector on the display assembly [1].
b. Lift the camera away from the display assembly [2].
Installing the camera
1.
Place the camera on the display assembly.
2.
Connect the camera cable to the connector on the display assembly
3.
Install the:
a.
display bezel
b.
display assembly
c.
WWAN
d.
WLAN
e.
battery
f.
base cover
4.
Follow the procedure in
Removing the dock frame
1.
Follow the procedure in
2.
Remove the:
a.
base cover
b.
battery
c.
hard drive assembly
d.
WLAN card
e.
WWAN card
3.
To remove the dock frame connectors:
a. Remove the screws that secure the dock frame to the computer [1].
b. Disconnect the keyboard cables [2, 3].
22
After working inside your
Before working inside your
or
M.2 SSD
or
PCIe SSD
system.
computer.