Table of Contents
Advertisement
Replacing the power-button
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Slide the power-button board under the tabs on the palm rest and align
the screw hole on the power-button board with the screw hole on the
palm-rest assembly.
2
Replace the screw that secures the power-button board to the palm-rest
assembly.
3
Adhere the power-button board cable to the palm-rest assembly.
4
Adhere the tape that secures the power-button board to the palm-rest
assembly.
Post-requisites
1
Replace the
display
2
Replace the
power-adapter
3
Replace the
system
4
Replace the
heat-sink
5
Replace the
I/O
6
Follow the procedure from step 3 to step 8 in
base".
7
Follow the procedure from step 4 to step 7 in
drive".
8
Replace the keyboard.
9
Replace the
memory
10 Replace the
wireless
11 Follow the procedure from step 4 to step 6 in
80
computer. After working inside your
assembly.
port.
board.
assembly.
board.
modules.
card.
After working inside your
"Replacing the computer
"Replacing the optical
"Replacing the hard
drive".
Advertisement
Table of Contents
