Table of Contents
Advertisement
Spinning
To omit the final spin (Rinse
hold)
Use the Further options button to se-
lect the
Rinse hold
is not spun after the final rinse and re-
mains in the final rinse water. This
helps prevent creasing if the laundry
is not going to be removed from the
drum immediately after the end of the
programme.
– To start the final spin:
The washing machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the Start/Stop button.
– To end the programme:
Use the Spin speed button to select
the
setting (Without spin) and
0 rpm
press the Start/Stop button.
The water will drain away.
To omit rinse and interim spin
and the final spin
Press the Spin speed button.
Select the
0 rpm
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch in.
In some programmes an additional rinse
is introduced with this setting.
36
setting. The laundry
setting.
Advertisement
Table of Contents
