Toshiba E-STUDIO352 Printing Manual page 180

4 Installing Client Software for UNIX
— Deleting a Print Queue Manually
You can also configure the print queue by adding a print queue manually.
The procedure varies depending on the operating systems.
P.178 "Deleting a print queue manually on Solaris"
P.178 "Deleting a print queue manually on HP-UX"
P.178 "Deleting a print queue manually on IBM AIX"
P.179 "Deleting a print queue manually on Linux"
P.179 "Deleting a print queue manually on OpenUNIX"
Deleting a print queue manually on Solaris
1
Log on to the root account.
2
Enter the following command:
lpadmin -x <queue name>
3
Enter the following command:
rm /etc/lp/interfaces/<queue name>.conf
Deleting a print queue manually on HP-UX
1
Log on to the root account.
2
Enter the following command:
ps -ef | grep lpsched | grep -iv grep > /dev/null 2>&1
3
Enter the following command:
Echo $?
4
If "0" outputted on the screen, turn the scheduler OFF. Enter the
following command:
/usr/sbin/lpshut > /dev/null 2>&1
5
Enter the following command:
/usr/sbin/lpadmin -x <queue name>
6
Enter the following command:
rm /etc/lp/interfaces/<queue name>.conf
7
If "0" was outputted on the screen in step 3, turn the scheduler ON.
Enter the following command:
/usr/sbin/lpsched > /dev/null 2>&1
Deleting a print queue manually on IBM AIX
1
Log on to the root account.
2
Enter the following command:
rm /opt/toshiba/tap/filter/<queue name>
3
Enter the following command:
rm /opt/toshiba/tap/filter/<queue name>.conf
178 Setting Up the UNIX Filters