Additional Sending Operations; Sending A Fax Manually; Dual Access - Brother mfc-8510dn Advanced User's Manual

Chapter 3
Additional sending
operations

Sending a fax manually

Manual transmission
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
a
Make sure you are in FAX mode
b
Load your document.
c
Press Hook and listen for a dial tone. Or
pick up the handset of an external
telephone and listen for a dial tone.
d
Dial the fax number you want to call
using the external telephone .
e
When you hear the fax tone, press
Start.
 If you are using the scanner glass,
press 1 to send a fax.
f
Replace the handset of the external
telephone.
16

Dual access

You can dial a number and start scanning the
3
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The LCD will show the new
3
job number.
The number of pages you can scan into the
3
memory will vary depending on the data that
is printed on them.
Note
If you get an Out of Memory message
.
while scanning the first page of a fax,
press Stop/Exit to cancel scanning. If you
get an Out of Memory message while
scanning a subsequent page, you can
press Start to send the pages scanned so
far, or press Stop/Exit to cancel the
operation.
3