Disabling Or Enabling The Touchpad; Connecting An External Device - Toshiba Tecra Z50-C Series User Manual

❖
Temporarily disable the touchpad, so that it does not
respond to touch or button presses while you type. See
"Disabling or enabling the touchpad" on page
❖
Adjust the sensitivity of the touchpad, so that it is less
responsive to accidental light taps and lighter finger
pressure.
NOTE

Disabling or enabling the touchpad

The touchpad is enabled by default. To enable/disable the
touchpad, press the
ON/OFF (
the touchpad. For more information, see
enabling wireless devices" on page

Connecting an external device

NOTE
You can easily attach an external device to your computer.
To do this:
1 Read the directions that came with the device to see if
you first need to install new software.
2 Connect the device's video or USB cable to the port on
the computer and to the device.
3 Connect the device's power cable to a live electrical
outlet (if applicable).
4 Turn on the external device (if applicable).
Your computer may automatically detect the external
device.
Touchpad setting options vary by computer model. The
touchpad settings are accessible through the Mouse
Properties option of the Windows Control Panel. For
more information, please visit support.toshiba.com.
FN
) button (available on certain models) located on
Depending on your system, some models may include
USB 3.0 port(s). To distinguish these ports, please look
for the blue inset within the USB 3.0 port (if available).
Getting Started
Using the touchpad
+ ( ) keys or press the Touchpad
167.
59
59.
"Disabling or