Get Started; Power Supply - Philips BT6000C37 User Manual

3 Get started

Always follow the instructions in this chapter in
sequence.

Power supply

Either AC power or battery can be used as
power supply of this product.
Option 1: Battery power
The speaker can operate on the built-in
rechargeable battery.
Note
•
Rechargeable battery has a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
•
It takes approximately three hours to fully charge the
battery.
•
The red LED indicator flashes when the battery is low.
To recharge the built-in battery:
• Connect the speaker to AC power supply;
or
• Connect the USB cable between
• the socket on the speaker, and
• a USB socket on a computer.
LED indicator Battery status
Solid red Under charging
Off Fully charged
Option 2: AC power
Caution
•
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the speaker.
•
Risk of electric shock! When you unplug the AC adapter,
always pull the plug from the socket. Never pull the cord.
EN 5