Replacing The Tail/Brake Light Bulb; Replacing A Turn Signal Light Bulb; Replacing The License Plate Light Bulb - Yamaha 2010 XVS1300AZ Owner's Manual

Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens by
removing the screws.
1. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
[ECA10681]
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU24133
Replacing a turn signal light
bulb
1. Remove the turn signal lens by re-
moving the screws.
1. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
EAU24212
Replacing the license plate
light bulb
1. Remove the license plate light cov-
1. License plate light cover
2. Bolt
2. Pull the license plate light unit up
[ECA10681]
1. License plate light unit
7-31
er by removing the bolts.
as shown.
EAU42484
7