D-Link DIR-615 User Manual page 69

DIR-615 Wireless N300 Router
User Manual
Figure 54. Configuring PPTP WAN connection. The expert settings mode. The Miscellaneous section.
Parameter
Isolate connection
Enable RIP
NAT
Firewall
Ping
Click the Next button to continue.
After that the page displaying all specified settings opens. Click the Apply button to create the
connection or the Back button to specify other settings.
After clicking the Apply button, the page for checking the connection availability opens (see the
Checking Internet Availability section, page 87).
Miscellaneous
When the checkbox is selected, the router uses an alternate routing
table for this connection. Select the checkbox only when your ISP
requires this.
Select the checkbox to allow using RIP for this connection.
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS
attacks.
Select the checkbox to allow the router to answer ping requests from
the external network through this connection. For security reasons,
it is recommended not to select this checkbox.
Page 69 of 208
Configuring via Web-based Interface
Description