Table of Contents
Advertisement
TouchPad board
Description
TouchPad board
Before removing the TouchPad board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
Remove the TouchPad board:
1.
Disconnect the TouchPad board cable from the system board (1).
2.
Remove the three Phillips PM2.0×3.0 screws (2) that secure the TouchPad board to the computer.
3.
Remove the TouchPad board (3).
Reverse this procedure to install the TouchPad board.
34
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page
28).
26).
Spare part number
855632-001
Advertisement
Table of Contents
