Advertisement
4.5.
Removing the Switch Assembly, LED Assembly and Battery Terminal.
Connecting and disconnecting the connector
4.6.
Removing the Gear Case Assembly from the Module Assembly.
* Precautions when attaching the connectors
Holding the motor assembly, remove the entire motor mounting plate,
including the gear box assembly from the motor assembly.
9
1. Remove the 2-pin connector.
2. Remove the 6-pin connector.
3. Pull the faston terminal directly
out from the switch assembly.
* Exercise care not to bend the ter-
minal fitting.
4. Remove the lead wires from the
battery terminal.
Advertisement
