Asus PA32UC User Manual page 23

Saturation
Hue
Advanced Setting
Gamma
Uniformity
Compensation
2.. Blue.Light.Filter
In this function, you can adjust the blue light filter level.
To activate this function, you need to do the following: turn off Ambient Effect
and disable HDR on your device.
Blue Light Filter
L e v e l 0
L e v e l 1
L e v e l 2
L e v e l 3
L e v e l 4
•. Level.0:.No change.
•. Level.1~4: The higher the level, the less blue light is scattered.
When Blue Light Filter is activated,the default settings of Standard Mode
will be automatically imported. Between Level 1 to Level 3, the Brightness
function is user-configurable. Level 4 is optimized setting. It is compliance
with TUV Low Blue Light Certification. The Brightness function is not user-
configurable.
Please refer to the following to alleviate eye strains:
• Users should take some time away from the display if working for long
hours. It is advised to take short breaks (at least 5 mins) after around 1
hour of continuous working at the computer. Taking short and frequent
breaks is more effective than a single longer break.
• To minimize eye strain and dryness in your eyes, users should rest the eye
periodically by focusing on objects that are far away.
• Eye exercises can help to reduces eye strain. Repeat these exercises
often. If eye strain continues please consult a physician. Eye exercises: (1)
Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes
diagonal.
ASUS PA32U Series LCD Monitor
Middle (50) Disable
Middle (50) Disable
Enable Disable
Enable Disable
Enable Enable
Middle (50) Middle (50) Middle (50) Disable
Middle (50) Middle (50) Middle (50) Disable
Enable Enable
Disable Enable
Enable Enable
StandardMode DisplayPort 3840 x 2160@
Middle (50)
Middle (50)
Enable Disable
Disable Disable
Enable Enable
PA32U
60Hz
Disable
Disable
Disable
3-3