Switch
SW1
Push
SW2
Push
SET1-1
DIP
SET1-2
DIP
SET1-3
DIP
SET1-4
DIP
SET2-1
DIP
SET2-2
DIP
SET2-3
DIP
SET2-4
DIP
SET3-1
DIP
SET3-2
DIP
SET3-3
DIP
SET3-4
DIP
Be sure to disconnect the power supply or turn off the breaker before changing the DIP switch
setting.
Function or operation method
• For the test run start and stop.
• For the pump down start and stop.
• For when check run function is activated.
• For displaying the check run.
• For resetting the Automatic wiring correction
memory.
For selecting cooling or heating during test operation.
For switching SW1 operation.
For switching the base heater.
(For extra cold climate area model only)
(Prohibited)
• For selecting outdoor unit low noise operation func-
tion.
• To use this function, the Central remote controller
(option) is necessary.
(Prohibited)
(Prohibited)
(Prohibited)
(Prohibited)
(Prohibited)
(Prohibited)
(Prohibited)
- 235 -
Factory setting
—
—
OFF
OFF
ON
OFF
(Do not change)
OFF
OFF
(Do not change)
OFF
(Do not change)
OFF
(Do not change)
OFF
(Do not change)
OFF
(Do not change)
OFF
(Do not change)
OFF
(Do not change)