Mitsubishi Electric 800 Series Instruction Manual page 9

• E: The output specification for monitoring and the rated frequency are shown for the standard model, and the
communication protocol group is shown for the Ethernet model and the safety communication model.
Symbol
-1 Pulse (terminal FM)
-4 Voltage (terminal AM)
-5 Voltage (terminal AM)
Protocol group A (CC-Link IE TSN, CC-Link IE Field Network Basic, MODBUS/
PA
TCP, EtherNet/IP, and BACnet/IP)
Protocol group B (CC-Link IE TSN, CC-Link IE Field Network Basic, MODBUS/
PB
TCP, PROFINET)
• F: Availability of circuit board coating / plated conductors is shown.
Symbol Circuit board coating
None Without coating
-60 With coating
*1 Conforming to IEC 60721-3-3 3C2
NOTE
• In this Instruction Manual, the inverter model name consists of the inverter rated current and the applicable motor capacity.
(Example) FR-E820-0008(0.1K)
 How to read the SERIAL number
Rating plate example
Symbol Year Month Control number
SERIAL
Monitoring/protocol specification
*1
Without plated conductors
Without plated conductors
The SERIAL consists of two symbols, three characters indicating the production year
and month, and six characters indicating the control number.
The last two digits of the production year are indicated as the Year, and the Month is
indicated by 1 to 9, X (October), Y (November), or Z (December).
Rated
frequency
60 Hz
50 Hz
60 Hz
60 Hz
50 Hz
Plated conductors
1
Control logic
Sink logic
2
Source logic
Sink logic
Sink logic
3
Source logic
4
5
6
7
8
9
10
9
1. Introduction
1.1 Product checking