Bosch DCU 220 Operating Instructions Manual page 12

en 12 | 1 687 023 744 | Initial commissioning
3. Place the adapter plate together with the docking
station on the trolley in such a way that the slides fit
through the holes in the rail.
 Adapter plate and docking station can be pushed
to the left or right.
4. Secure the unit using one or two screws, depending
on position.
|
1 689 989 227 2016-02-10
5. Operation
!
Only use the power supply unit 1 687 023 776 included
in the scope of delivery.
1. Connect the cables of the peripheral devices to the
corresponding ports at the docking station.
2. Connect the power supply unit to the docking station.
 The power LED lights up.
3. DCU 220 align at the two tabs of the docking station
(see encircled part in the figure).
4. Push the lock to the right so that the two rear guide
pins engage into the recesses on the DCU 220.
5. Put the key into the lock. Push key in and turn it to
engage the lock.
Robert Bosch GmbH