Bosch LTE 65EU Manual page 18

4 | Tools
4.3.2 Adding car in WDServer
18 / 28
WDServer always has a reference to whichever configuration is programmed into your
vehicle's logger system.
– If the RaceCon project for the vehicle resides on a different computer than that which
is used for telemetry, then all INI files for a given project should be transferred to the
telemetry computer after every data synchronization in RaceCon. WDServer may have
trouble recognizing INI files stored on removable media, so best practice is to copy
these files to the telemetry computer's hard drive.
To set up a new car, select Add Car.
In the Car settings tab, enter a name for the new vehicle. This name will be used as part of
the file name for WDServer's log of received telemetry data and will also show up in Darab
when searching for the telemetry stream in the Network folder.
Telemetry System LTE 65 Manual Bosch Motorsport