Frigidaire FAX054P7A Use & Care Manual page 6

Air Conditioner Features
(continued)
TO CHANGE TEMPERATURE
SETTING:
TO ADJUST FAN SPEEDS:
TO USE AUTO TEMP FEATURE:
PRESS AUTO
SZ000722(En)-YaoKong 6
YOU WILL SEE:
DO THIS:
PRESS TO
RAISE
PRESS TO
LOWER
YOU WILL SEE:
DO THIS:
PRESS TO
SELECT:
FASTER
SLOWER
YOU WILL SEE:
DO THIS:
TEMP
Note: Tap or hold either up(
the desired temperature is seen on the display. This tempera-
ture will be automatically maintained anywhere between 60˚F
(16˚C) and 90˚F (32˚C). If you want the display to read the
actual room temperature. See "To Operate on Fan Only" sec-
tion on Page 7.
A 2 Digit Display is used to indicate the Fan Speed setting,
from 10 through 99. When the "SLOWER" button is pressed
the motor speed will slow down at multiple intervals (90 distinct
settings), to a minimum setting of 10. To speed the motor up,
press the "FASTER" button. The speed will increase at multiple
intervals to a maximum setting of 99. After 5 seconds the control
will automatically change back to displaying the set temperature.
LIGHT On
Note: Fan starts at High Speed and adjusts to a slower speed
as the room temperature dictates. For example if the room
doesn't get too warm, it will stay at the slowest speed. If the
room temperature rises quickly, such as a door being opened,
it will automatically go to the highest speed. The fan speeds
will re-adjust back to the slowest speed as the room returns to
the original set temperature. Press either the fan slower or fan
faster button to adjust the fan speed manually.
6
09/12/2005, 11:39 AM
) or down( ) button until