Neutralizing Agent; Refilling Neutralizing Agent - Miele PG 8583 CD Operating Instructions Manual

Refilling

neutralizing agent

Adding and dispensing process chemicals
Neutralizing agent
Neutralizing agent (pH setting: acidic) neutralizes any residues of
alkaline cleaning agents on the surface of the load and protects the
wash chamber from deposits and discoloration.
Neutralizing agent is dispensed automatically in the
phase after the main wash (see Program charts). The neutralizing
agent container must be filled and the dispensing system vented for
this to occur.
Inorganic
In the program neutralizing agent is dispensed additionally
for an acidic pre-wash.
Open the drawer in the side unit.

Remove the neutralizing agent container (red marking) and place it

on the open cabinet door or on a surface which is robust and easy
to clean.
Take the lid off the canister and remove the suction lance. Place the

suction lance on the open wash cabinet door.
Replace the empty container with a full one.

Push the suction lance into the opening of the container and secure

the lid. Observe the colour coding.
Feed the suction lance into the container until it reaches the

bottom.
Wipe up any spilled process chemical thoroughly.

Place the container back in the drawer in the side cabinet.

Close the drawer. Ensure that the dispensing tubes and cords are

not kinked or trapped.
The dispensing system must then be vented (see "Settings  /

Venting DOS").
Interim rinse
49