Mesh Network Main Device (Controller) - D-Link DIR-822 User Manual

DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh
Router
User Manual

Mesh Network Main Device (Controller)

In order to configure DIR-822 as a main device of your mesh network, from the Connection
method list, select the EasyMesh value. Then from the Device Role list, select the Controller
value.
In order to connect your main device to a wired ISP, from the Work mode list, select the Router
value. In this mode you can configure a WAN connection, set your own settings for the wireless
network in the 2.4GHz and 5GHz bands, configure LAN ports to connect an STB or VoIP phone,
and set your own password for access to the web-based interface of the device.
Figure 41. Configuring the EasyMesh function for the main device. The Router mode.
Page 50 of 213
Configuring via Web-based Interface