Assembling The Blower - Toro Flex-Force Power System 60V MAX Operator's Manual

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Mounting hardware (not included)
Blower tube
Important:
The battery pack is not fully charged
when you purchase it. Before using the tool for
the first time, refer to
(page 11).
Mounting the Battery
Charger (Optional)
If desired, mount the battery charger securely on a
wall using the wall-mount key holes on the back of
the charger.
Mount it indoors (such as a garage or other dry place),
near a power outlet, and out of the reach of children.
Refer to Figure 3 for assistance in mounting the
charger.
Slide the charger over the appropriately positioned
hardware to secure the charger in place (hardware
not included).
Charging the Battery Pack
Figure 3
Qty.
2 Mount the battery charger (optional).
1 Assemble the blower.

Assembling the Blower

Slide the blower tube onto the blower housing. You
may need to press down on the tube latch for the
blower tube to lock into place
1. Tube latch
g290534
7
Use
(Figure 4).
Figure 4
g273147