Yamaha DRIVE2 AC 2019 Owner's/Operator's Manual page 23

J0E
PRE-OPERATION CHECKS
BATTERY
Charge batteries before each use.
See charging steps in Chapter 8,
Maintenance.
Check that the batteries are held
securely in place to prevent the
batteries from being damaged from
vibration or jarring. Also check that
no battery caps are missing to
prevent battery acid from spilling
from the battery. Check the battery
terminals for corrosion.
Battery electrolyte is poisonous
and dangerous, causing severe
burns, etc. It contains sulfuric
acid. Avoid contact with skin, eyes
or clothing. Ventilate when
charging or using in enclosed
space. Always shield eyes when
working near batteries. KEEP OUT
OF REACH OF CHILDREN.
TIRE CONDITION
Tire Air Pressure
Check the tire air pressure before
operating the PTV.
Tire pressure:
Y-30
Tire Wear Limit
Check the tire surface for damage,
cracks or embedded objects. When
tire tread wears down to 1 mm
(0.04 in.), replace the tire.
å Wear limit
Y-31
152 kPa, 1.5 kgf/cm
(22 psi)
1
2
3
4
5
6
7
8
9
10
2
11
6-2