Maintenance And Storage - DeWalt DWOAS9ST Instruction Manual

English
b ) Never allow children or people unfamiliar with
these instructions to use the machine. Local
regulations can restrict the age of the operator.
c ) Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or
their property.
Preparation
a ) Before use, always visually inspect the machine for
damaged, missing or misplaced guards or shields.
b ) Never operate the machine while people, especially
children, or pets are nearby.
Operation
a ) Wear eye protection and stout shoes at all times while
operating the machine.
b ) Avoid using the machine in bad weather conditions
especially when there is a risk of lightning.
c ) Use the machine only in daylight or good artificial light.
d ) Never operate the machine with damaged guards or
shields or without guards or shields in place.
e ) Switch on the motor only when the hands and feet are
away from the cutting means.
f ) Always disconnect the machine from the power supply
(i.e.remove the plug from the mains, remove the
disabling device or removable battery)
• whenever the machine is left unattended;
• before clearing a blockage;
• before checking, cleaning or working on the
machine;
• after striking a foreign object;
• whenever the machine starts vibrating abnormally.
g ) Take care against injury to feet and hands from the
cutting means.
h ) Always ensure that the ventilation openings are kept
clear of debris.
i ) Remove any objects that may cause kickback, such as
branches and rocks.
j ) Check for loose fasteners and damaged parts.
k ) Hold the tool using only the designated gripping
surfaces: the powerhead housing and the auxiliary
handle (see Fig. D).Do not use the pole as a
gripping surface.

Maintenance and Storage

a ) Disconnect the machine from the power supply
(i.e.remove the plug from the mains, remove the
disabling device or removable battery) before carrying
out maintenance or cleaning work.
b ) Use only the manufacturer's recommended
replacement parts and accessories.
c ) Inspect and maintain the machine regularly.Have
the machine repaired only by an authorized repairer.
d ) When not in use, store the machine out of the reach
of children.
e ) Clean before storing, including the use of guards.
6
ADDITIONAL SAFETY INSTRUCTIONS FOR
GRASS TRIMMERS

WARNING: Cutting elements continue to rotate after
the motor is switched off.
• Wear long pants to protect your legs from flying debris.
• Wear appropriate footwear to protect your feet from debris,
including flying debris.
• Before using the appliance, check that your cutting path is
free from sticks, stones, wire and any other obstacles.
• To reduce the risk of rebound (ricochet) injury, work going
away from any nearby solid object such as a wall, steps,
large stone, tree, etc. Use great care when working close to
solid objects and where necessary, do trimming by hand.
• Only use the appliance in the upright position, with the
cutting line near the ground. Never switch the appliance on
in any other position.
• Move slowly when using the appliance. Be aware that
freshly cut grass is damp and slippery.
• Do not work on steep slopes. Work across the face of slopes,
not up and down.
• Do not overreach. Keep proper footing and balance at all times.
• Never cross gravel paths or roads while the appliance
is running.
• Avoid accidental starting. Do not carry with your finger on
the trigger when the battery is installed.
• Never touch the cutting line while the appliance is running.
• Do not put the appliance down until the cutting line has
come to a complete standstill.
• Use only the appropriate type of cutting line. Never use
metal cutting line, metal wire, cable, rope or fishing line.
• Keep face, hands and feet away from the cutting line and
blade at all times, especially when switching on the motor.
• Before using the appliance and after any impact, check for
signs of wear or damage and repair as necessary.
• If you strike or become entangled with an object, stop the
appliance immediately. Remove battery, check for damage
and have any damage repaired before continuing. Do not
operate with a broken hub or spool.
• Take care against injury from any device fitted for trimming
the filament line length. After extending new cutter line
always return the machine to its normal operating position
before switching on.
• Close supervision is necessary when the appliance is used
near children.
• This appliance is not intended for use by young or infirm
persons without supervision.
• This appliance is not to be used as a toy.
• Use in a dry location only. Do not allow the appliance to
become wet.
• Do not immerse the appliance in water.
• Do not open the body casing. There are not user‑serviceable
parts inside
• Do not operate the appliance in explosive atmospheres,
such as in the presence of flammable liquids, gases or dust.