MVMS Management Server User Manual
8
TV Wall
8.1 Add TV Wall Server
Go to Home Add, Edit or Delete DeviceTV Wall Server interface as shown below.
An adding TV Wall window will be prompted by clicking [Add]. Click [Refresh] to quickly add the TV wall server in the same local
network, or add the TV wall server by manually entering server name, IP address and port.
Click
to modify the added server; click
to delete the added server.
8.2 Add Decoder
Decoder is used to decode the video signal transmitted by the transfer server. The decoding output is a standard video signal. The decoder
is necessary for decoding videos on the TV wall.
Go to HomeAdd, Edit or Delete DeviceDecoder interface.
The setting steps of adding decoders are the same as adding encoding device setup (see Add Encoding Device for details).
8.2.1 Create and Connect Decoder
The decoder which needs to be connected to the platform must be the master decoder and in platform mode. Login the web client of the
decoder as shown below.
Go to Basic Settings System Settings to check the user permission and running mode of the decoder and make sure its user permission is
master and its running mode is platform. Then apply the settings and restart the decoder.
36