Configure a XS-2426G-A indoor ONT
Configuring the Application
Configuring port forwarding
Figure 8-38 Port Forwarding page
2
Configure the following parameters:
Table 8-33 Port Forwarding parameters
Field
Application Name
WAN Port
LAN Port
Internal Client
Protocol
Enable Mapping
WAN Connection List
138
Description
Select an application name from the list.
The default is Custom settings.
Enter the WAN port range.
Enter the LAN port range.
Select a connected device from the list and enter the associated IP address.
Select the port forwarding protocol from the list:
• TCP
• UDP
• TCP/UDP
Select this checkbox to enable mapping.
Select a WAN connection from the list.
Note: Only active devices are shown on this list.
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA
Nokia ONT
December 2020
Issue 1