Table of Contents
Advertisement
Points to Note
Before Installation
l
The positions of the air inlets, outlet, PM2.5 Sensor, and odor sensor
are as shown in the diagram on the right. Observe the following
points.
Do not block the air inlets and outlet by placing an object near it.
→ The air purification function will deteriorate.
Do not block the odor sensor.
→ Odor will become unable to be detected.
Do not block the PM2.5 Sensor.
→ Contamination will become unable to be detected.
This air purifier cannot be used mounted to a wall.
Installation Procedure
l
l Install the unit in a location with good air circulation.
Installing the unit where it faces an air
conditioner improves the circulation effect.
Installation in a high
location
Effective for
cigarette smoke
Installation in a low
location
Effective for pollen
and dust
l Leave space around the unit.
If the unit is placed on a surface that is not
flat or stable (on carpet, tatami, etc.), it may
vibrate.
When Moving the Unit
l
Turn OFF the operation and unplug the
power plug.
While carrying the unit, hold it firmly
by the handle and keep the power cord
away from the floor not to step on.
If the unit is moved or tilted while it is operating,
sound may be emitted from the blower fan.
At least 60 cm
At least
10 cm
At least
20 cm
At least
20 cm
At least 20 cm
Odor sensor
(inside unit)
Inlet
Inlet
l Observe the following when installing the unit.
Do not place the unit near or on anything
that is hot such as a heater.
This may cause malfunction,
deformation, or discoloration.
Do not place the unit where it will be
subject to direct sunlight.
This may cause deformation or
discoloration.
Ensure that there is a distance of at least 1
m from a TV, cordless telephone, air
conditioner, personal computer, fluorescent
light fitting, etc.
Failure to do so may result in
electromagnetic waves interfering
with the other equipment.
Handle
Inlet
PM2.5 Sensor
3
Advertisement
Table of Contents
