Reviewing A Recording - Canon XF605 Instruction Manual

Hide thumbs Also See for XF605:
Table of Contents

Advertisement

Recording Video and Photos

Reviewing a Recording

You can review all or part of the last clip recorded even with the camera set to CAMERA mode.
1 Select
> [
48
Recording] > Desired option.
2 After you finish recording a clip, press the
• The last clip that was recorded is played back for the
selected duration. [Ð REVIEW] appears on the screen.
• There will be no sound from the built-in speaker but the
audio will be output from the × (headphone) terminal and
HDMI OUT terminal.
• You can use the joystick to jump back/forward within the
clip. You can also touch or slide the onscreen progress bar
to move to a different position in the video (A 133).
• Press CANCEL or flick down on the screen to stop
reviewing the clip.
• After the clip finishes playing back, or if you stop reviewing
the clip, the camera returns to record standby mode.
Options
[Entire Clip]:
Allows you to review the entire clip.
[Last 4 sec]:
Allows you to review just the last 4 seconds of the clip.
NOTES
NOTES
• If the camera switched cards during a recording, the camera will play back the clip on the card most recently
recorded on.
• You cannot review clips when continuous recording is activated.
B
System Setup] > [Review
u
button.

Advertisement

Table of Contents
loading

Table of Contents