About This Documentation; Change Record; Overview On Target Groups And Product Phases - Bosch rexroth IndraControl XFE 01.1 Operating Manual

IndraControl XFE 01.1
1

About this documentation

1.1

Change record

Table 1: Editions of this documentation
Edition Release Note
date
01 2014-10 First edition
02 2016-08 CAN modules and Sercos modules supplemented
03 2016-10 Corrections
04 2017-02 Explosion protection notes and type plate supplemented
05 2019-06 Standards and warning instructions modified for UL, explosion protection notes
removed
06 2021-08 Description of the LEDs "SF" and "BF" supplemented for the RT-Ethernet module
1.2

Overview on target groups and product phases

In the following illustration, the framed activities, product phases and target groups refer to the present
documentation.
Example: In the product phase "Mounting (assembly/installation)", the target group "Mechanic/electri-
cian" can execute the activity "install" using this documentation.
Product
Selection
phases
Presales Aftersales
Design engineer
Programmer
Technologist
Target
Process
groups
specialist
Select
Prepare
Activities
Design
Construct
Fig. 1: Assigning the present documentation to the target groups, product phases and activities of the
target group
R911345570, Edition 06
Mounting
Engineering
(assembly/installation)
Mechanic/
electrician
Programmer
Commissioning engineer
Unpack Parameterize
Mount Program
Install Configure
Simulate
Overview on target groups and product phases
Commissioning Operation
Technologist
Process specialist
Machine
operator
Maintenance
technician
Service
Optimize Operate
Test Maintain
Remove
faults
Create the
NC program
5 / 36
Decommissioning
Mechanic/
electrician
Disposal company
Dismount
Dispose
Bosch Rexroth AG