Advertisement
1. Cleaning the bottle
Clean the bottle except for the lter cartridge with mild detergent by hand or
in the dishwasher (max 50℃).
2. Preparing and installing the lter
Take the lter out of the packaging, check if the sealingring is in place. Rinse it
under tap water for 10 seconds. Unscrew the lid anti-clockwise. Remove the
bottom cover of the lter case and insert the lter cartridge. Put the cover back,
and set the time of the next change by turning the dial. The arrow should be
pointing at the install month, and the dot indicates when to replace the lter.
3. Filling the bottle
Fill the bottle with tap water up to the Max line. Screw the lid back on to the
bottle. Remove the cap, pull out the mouthpiece and enjoy the crisp and pure
tasting water!
4. Changing the lter cartridge
One lter can lter up to 200 liters of tap water. To ensure optimal ltration
and hygiene, it is recommended to replace the lter every 4 weeks. To do this,
repeat step 2.
Get started
05
Advertisement
