Table of Contents
Advertisement
5.SELECT DENSITY
6.TONER SUPPLY LOW Set the fax to continue printing even after toner runs low
RX TO MEMORY
KEEP PRINTING
16-18
Summary of Important Settings
2. SELECT REDUCE DIR Select the direction of reduc-
VERTICAL ONLY Reduction performed in the
HORIZ & VERTICAL Reduction performed in the
Adjust the print density of documents you receive.
LT (Light), STD (Standard), DK (Dark)
and the Change Cartridge indicator lights and the
REPLACE CARTRIDGE message appears.
Stop printing and receive the remainder of the document
in the memory.
Ignore the warning and keep printing until the document
is completely printed. This setting is convenient when a
new toner cartridge is not at hand. However, even if the
toner cartridge is out of toner, the fax will not receive the
document in the memory. After installing the new toner
cartridge, be sure to set to RX TO MEMORY.
tion for the percentage of fixed
reduction selected above.
vertical direction only.
horizontal and vertical
direction.
Chapter 16
Advertisement
Table of Contents
