Table of Contents
Advertisement
Input control
The Input control option enables the user to select graphics manually from one of the two sources. The
following options are available in the Input control menu list:
Note: DisplayPort has priority over VGA. So, if DisplayPort is hot plugged when VGA is running, DisplayPort
will take priority and graphics from DisplayPort will automatically be displayed on UPG 1U Rackmount
Console screen.
Advanced
The Advanced option provides access to the following options:
•
OSD settings menu
•
Exit sub-menu
OSD settings
The OSD settings option provides access to the following options:
•
Lock OSD settings
•
Timeout
•
V position
•
H position
•
Exit sub-menu
Lock OSD settings
The Lock OSD settings option locks or unlocks the OSD settings.
Timeout
The Timeout option displays a slider bar at the right side of the OSD display to enable the adjustment of OSD
timeout. The timeout ranges from 5 to 60 seconds with 1-second intervals. The default setting is 10 seconds.
Vertical position
The V position option enables the location of the OSD window to move up or down on the screen.
Horizontal position
The H position option enables the location of the OSD window to move left or right on the screen.
VGA
DP
Exit sub-menu
Yes
No
Advertisement
Table of Contents
