Bundling The Connecting Cables; Installing The Tv Against A Wall Or Enclosed Area - Sony BRAVIA KDL-40XBR9 Operating Instructions Manual

Bundling the Connecting Cables

Use the attached cable clamper to bundle the connecting cables. The cable clamper is located on
the Table-Top Stand as illustrated. Refer to the online Reference Book when mounting the TV to a
wall.
Do not bundle the AC power cord with other connecting cables.

Installing the TV Against a Wall or Enclosed Area

Make sure that your TV has adequate ventilation. Allow enough space around the TV as shown
below. Avoid operating the TV at temperatures below 41 °F (5 °C).
Installed with stand
7
11
(30 cm)
4 inches
(10 cm)
Leave at least this much space around the set.
Never install the TV set as follows:
Air circulation is blocked.
Wall
• Inadequate ventilation can lead to overheating of the TV and may cause TV damage or cause
a fire.
/
inches
8
3
/
2
4 inches
(6 cm)
(10 cm)
Air circulation is blocked.
Installed on the wall
inches
8
4 inches
(10 cm)
Wall
7 /
11 inches
8
(30 cm)
4 inches
(10 cm)
Leave at least
this much space
around the set.
4 inches (10 cm)
15