ABB ACH580-01 VxR R1 Instructions Manual page 4

REPLACEMENT INSTRUCTIONS | ACH580-01 VXR UL TYPE 1 , R1/R2
Step Instruction
7
Using a T30 bit, loosen the two (2) bottom M6 screws securing the
drive, four (4) turns of the screw.
NOTE: Do not remove the screw completely. Only loosen enough to
be able to lift the drive off the screws.
8
Using a T30 bit, loosen and remove the top two (2) M6 screws
securing the drive.
Carefully lift the drive out of channel.
9
Unpack the replacement drive.
Remove drive cover by pushing up on the sides as indicated by
arrow.
Diagram
4