Hitachi WJ200-004MF Manual page 3

Simple positioning control
4
(when feedback signal is used.)
When simple positioning function is activated, speed control operation or
positioning control operation is selectable via intellient input. While the [SPD]
input is ON, the current position counter is held at 0. When [SPD] is OFF, the
inverter enters positioning control operation and the position counter is active.
Output Frequency
Start position counting
Speed control Position control
SPD input
ON
Induction motor & Permanent magnetic motor*
5
control with one inverter
The WJ200 inverter can drive both induction motors (IM) and permanent
magnetic motors (PM). Energy conservation and miniaturization can be
achieved using PM motors. Moreover, one inverter used for two types of motor.
IM + Inverter
PM + Dedicated Controller
*Permanent magnet motor control function of WJ200 is for variable torque application such as fan and pump.
Global standards
1
Conformity to global standards
CE, UL, c-UL, RCM approvals.
(1-phase 100V class is for CE, UL and c-UL only)
2
Sink / source logic is standard
Logic input and output terminal can be configured for sink or source logic.
3
Wide input power voltage range
Input voltage 240V for 200V class and 480V for 400V class as standard.
DB
Time
Target position
(corresponds more than Ver.2.0)
IM
WJ200
PM
Index
Features
Standard Specifications
General Specifications
Dimensions
Operation and Programming
Terminal
(Arrangements/Functions)
Function List
Protective Functions
Connecting Diagram
Connecting to PLC
Wiring and Accessories
De-rating Curves
Communication Option
For Correct Operation
Pursuing the Ideal Compact Inverter
Designed for excellent performance and user friendliness
Hitachi Industrial Equipment Systems Co., Ltd.
NARASHINO division is certified for ISO 14001
(standard of environmental management
system) and ISO 9001 (standard of quality
assurance management system).
JQA-1153
JQA-EM6974
P 2– 5
P6
P7
P8
P 9
P10 –1 1
P12–20
P 21
P 22–23
P 24
P 25 –27
P 28
P 29
P30 – 31
3 3