Download Print this page

HP Encore 22ep Product End-Of-Life Disassembly Instructions

Advertisement

Quick Links

Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP 22ep 22-inch Display
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium
coin or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
2
0
0
1
0
0
3
0
0
0
0
0
Page 1

Advertisement

loading

Summary of Contents for HP Encore 22ep

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable)
  • Page 3: Appendix 3 Product End-Of-Life Disassembly Instructions

    HP 22ep 21.5-IN Display Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment. Items Requiring Selective Treatment Items listed below are classified as requiring selective treatment.
  • Page 4 Release all materials and put some by ESD; OPTIONAL: Depending upon the complexity of the disassembly process, a graphic depicting the locations of items contained within the product which require selective treatment (with descriptions and arrows identifying locations) can be inserted below: HP Restricted Page 2...
  • Page 5 Press white button with one hand b. Pull out stand & base with another hand (2).Disassy base and stand Twist out the screw Step 2: Strip the screws from rear cover, then move rear cover follow the below way HP Restricted Page 3...
  • Page 6 (3.1) Remove the acetate tapes covering the LVDS/ LED FFCs; (3.2) Pull out the LVDS/ LED FFCs to separate the base assembly from the unit; (3.3) Remove the four screws to separate shielding from CB (3.4) Dismantle the rear cover supporter Remove all tapes HP Restricted Page 4...
  • Page 7 24-07-2012 Pull out all FFCs connectors and remove screws Remove the nine marked screws to remove rear cover supporter HP Restricted Page 5...
  • Page 8 24-07-2012 Step 4: Strip the screws *5pcs HP Restricted Page 6...
  • Page 9 24-07-2012 Step 5: Release all materials and put some by ESD; Can follow the picture as bellow; HP Restricted Page 7...