P25 Digital Vehicular Repeater System; Sideloading Files On Apx Next Using Usb Cable; Lte; Editing Apn Configuration - Motorola APX NEXT User Manual

MN005642A01-AN
Chapter 18 : Connectivity
3 To view the device information, tap
4 Tap Forget twice, to confirm the request.
18.5

P25 Digital Vehicular Repeater System

Motorola Solutions offers an MSI Certified APX compatible, third party, P25 Digital Vehicular Repeater
System (DVRS). This provides low-cost portable radio coverage in areas where only mobile radio
coverage is available.
NOTE: Portable subscriber units enabled in the system for Radio Authentication shall be able to
authenticate regardless of whether they are communicating directly on the system or by using a
DVRS.
DVRS can also work with SmartConnect to use broadband coverage for the in-vehicle mobile. Portable
radios communicate through the in-vehicle mobile to the system through the LTE, Satellite, or Wi-Fi
connection. This extends the system coverage when you are away from the vehicle.
18.6

Sideloading Files on APX NEXT Using USB Cable

Procedure:
1 Connect your APX NEXT radio to your PC using a USB cable.
2 From the APX NEXT home screen, select Settings→Advance→USB Connection→File
Transfer.
3 From your PC, click on your connected APX NEXT device and select Internal Shared Storage.
4 Upload your desired files into the appropriate folders.
NOTE: A persistent notification appears on your radio if your radio's storage has between
0%-5% left. The notification can be dismissed when your radio has 6% or more internal
storage remaining.
18.1

LTE

Your radio is set up with Long Term Evolution (LTE) broadband connection to enable Smart
Programming out-of-the box, and also the SmartConnect and SmartLocate features.
In some countries, an LTE SIM may be installed into the radio by Motorola Solutions before delivery.
Each preinstalled SIM is locked to the specific radio so it cannot operate in any other radio or device.
The SIM is located in a slot in the rear chassis. Do not remove the SIM, even if LTE is not active or in
use.
NOTE: On certain occasions, the Access Point Name (APN) information needs to be edited on
the device to establish connectivity with the country's SIM carrier company.
18.1.1

Editing APN Configuration

Procedure:
1 From the Home screen, tap
72
next to the name of the device.
System Settings.